Last Updated on October 23, 2022
One of the most common questions we get asked at iFixYouri is whether or not you can replace iPhone camera glass. The answer is, unfortunately, no. The front and rear camera lenses on the iPhone are made of sapphire crystal, which is incredibly strong and scratch-resistant.
However, this also makes the lenses very difficult to break or crack.
- Power off your iPhone and remove the SIM card tray
- Use a suction cup to slightly lift and remove the front panel assembly from the rear case
- Use a Phillips #000 screwdriver to remove the two screws securing the camera bracket to the logic board
- Gently pull on the camera connector to disconnect it from the logic board and set it aside
- Remove the old camera glass by gently prying it up with a plastic opening tool or your fingernail
- Be careful not to damage any of the surrounding components as you do this
- Clean up any adhesive residue left behind on the camera housing with a cotton swab dipped in isopropyl alcohol
- 7 Peel off one side of the double-sided adhesive strip included with your new replacement glass, and align it over the opening in the camera housing making sure that everything is lined up correctly
- Press down on it firmly to adhere it in place, then peel off the other side of the strip
- 8 Carefully lower your new replacement glass into place over the sensor and press down on all sides until you hear it snap into place
Can I Replace the Iphone Camera Glass Myself
The iPhone camera is one of the most important parts of the phone, and it can be very expensive to replace. If you’re looking to save money by replacing the glass yourself, there are a few things you need to know.
First, it’s important to note that the iPhone camera is made up of two parts – the lens and the sensor.
The lens is the part that you see when you look through the viewfinder, and it’s what actually captures the image. The sensor is located behind the lens and converts light into digital information that can be stored on your iPhone.
If your camera is cracked or scratched, chances are good that only the lens needs to be replaced.
This is a relatively easy fix, and there are a number of tutorials online that can walk you through the process. Just be sure to use caution when handling any delicate electronic components.
Replacing just the sensor is a bit more complicated, and we wouldn’t recommend attempting this unless you’re comfortable working with small electronic components.
If you do decide to go this route, again, there are plenty of tutorials available online. But be warned – if you damage the sensor beyond repair, you’ll likely have to replace your entire iPhone camera assembly (lens and sensor).
So there you have it – everything you need to know about replacing an iPhone camera lens or sensor yourself.
Just remember to take your time and exercise caution when working with any delicate electronic components.
How Much Does It Cost to Replace the Iphone Camera Glass
If your iPhone camera glass is cracked, you may be wondering how much it will cost to replace it. The good news is that Apple offers a $29 camera replacement program for certain models of the iPhone. This program covers iPhones that are out of warranty and includes the cost of labor and a new rear camera.
However, if your iPhone is not eligible for the $29 replacement program or you prefer to do the repair yourself, you can expect to pay around $100 for the parts and labor. Keep in mind that this price may vary depending on your location and the severity of the damage.
Where Can I Get My Iphone Camera Glass Replaced
If you have a cracked or shattered camera lens on your iPhone, there are a few things you can do to try to repair it. First, if the crack is small, you can try using a clear nail polish or super glue to seal it. This may not work perfectly, but it can help prevent the crack from getting worse.
If the crack is bigger, you’ll need to replace the entire camera lens assembly. You can purchase this part from an online retailer like iFixit or Amazon. Be sure to get the correct model number for your iPhone before ordering.
Once you have the replacement part, follow these instructions to remove the old lens and install the new one:
1. Power off your iPhone and remove the SIM card tray.
2. Use a suction cup to gently lift and remove the front panel assembly from your iPhone.
Be careful not to damage any of the delicate cables underneath.
3. Locate the two screws that hold down the camera lens assembly and remove them with a Phillips screwdriver. 4 Pull out the old camera lens assembly and disconnect any remaining cables attached to it.
5 Line up your new camera lens assembly withthe opening in your iPhone’s case and insert it carefully 6 Screw in the two mounting screws until they’re snug but don’t over-tighten them 7 Reconnect any cables that were attachedto your old camera len sassembly 8 Carefully snapthe front panel back ontoyour iphone 9 Replace th SIM card trayand power onyour device
Assuming everything went accordingto plan ,you should nowhavea workingcameraagain !
iPhone Camera Glass Lens Replacement Procedure | EASY FIX
Conclusion
If your iPhone’s camera glass is cracked, you may be wondering if you can replace it yourself. The short answer is yes, but the long answer is a bit more complicated.
To replace the camera glass, you’ll need to purchase a replacement lens and some tools.
Once you have those, you’ll need to remove the old lens and adhesive, clean the area, apply new adhesive, and then attach the new lens.
It’s a bit of a process, but it’s definitely doable if you’re comfortable working with small parts and have some patience.