Last Updated on October 14, 2022
Instax mini 11 is an easy to use, instant camera that produces high-quality prints. In this article, we will show you how to set up your instax mini 11 for the first time. Follow these simple steps and you’ll be ready to start snapping away in no time!
1. Firstly, insert the AA batteries into the battery compartment located on the bottom of the camera. Make sure they are inserted correctly according to the (+/-) symbols.
2. Next, install the film pack by opening up the film door located on the back of the instax mini 11.
Insert one end of the film pack into the slot and then close the door until it clicks shut.
3. Once you have installed the film pack, turn on your instax mini 11 by sliding the power switch located on top of the camera to ON. The green LED light next to the power switch will light up, indicating that your instax mini 11 is now ready to use!
- Unpack your Instax Mini 11 from the box
- Find the film cartridge and insert it into the camera
- Turn on the power switch and select your desired mode
- Use the viewfinder to frame your subject, then press the shutter button halfway to focus
- Press the shutter button all the way down to take a photo!
Q: How Do I Set Up My Instax Mini 11 for the First Time
Assuming you would like a step-by-step guide on how to set up the Fujifilm Instax Mini 11 for the first time:
1. Open the back cover and insert two AA batteries following the correct polarity as indicated inside the battery compartment. Close the back cover.
2. Insert a credit card size INSTAX Mini Film into the cartridge slot. Make sure to insert it in correctly with the yellow tab facing upward. If inserted correctly, you should hear a clicking sound.
Eject any film that was accidentally loaded into the cartridge in reverse order.
3. Press down on the black button located on top of the camera until you hear a shutter sound indicating that it is ready to take pictures. The lens will extend and a small mirror will pop out from behind it (this is normal).
If this does not happen, check to make sure that batteries are properly inserted and/or if your film cartridge is empty
4. To take a picture, simply press down on the large white button located on top of grip (where your right hand would go when holding it).
Once You’Ve Done That, You’Re Ready to Start Taking Pictures! Q: How Long Does It Take to Charge the Battery
A: It takes about 2-3 hours to charge the average camera battery.
Q: How Many Pictures Can I Take With One Roll of Film
One roll of film typically contains 36 pictures. However, this number can vary depending on the type of camera you are using.
Fujifilm Instax Mini 11 Unboxing and Setup
Conclusion
Instax mini 11 is a new instant camera from Fujifilm. It’s easy to use and comes with everything you need to get started. Here’s a quick guide on how to set it up for the first time.
1. Start by inserting the batteries into the camera. You’ll need two AA batteries.
2. Next, insert the film cartridge into the camera.
Make sure that the yellow dot on the cartridge aligns with the yellow dot on the camera.
3. Once the film is inserted, close the film door and wait for the red light to turn off. This indicates that the film is ready to use.
4 . To take a picture, simply point and shoot! The flash will automatically activate in low-light conditions or when you’re taking a close-up photo.
5 . When you’re finished taking pictures, open up the film door and remove the exposed film cartridge. Be sure to keep it in a safe place until you’re ready to develop your photos!